Synthesis,characterization and antifungal property of Ti3C2Tx MXene nanosheets

Although the antibacterial properties of MXene nanosheets containing Ti₃C₂T_x are known, their antifungal properties have not been well studied. Herein, we present for the first time a report on the antifungal properties of Ti₃C₂T_x MXene. The Ti₃C₂T_x MXene was obtained by first exfoliating MAX phase of Ti₃AlC₂ with concentrated hydrofluoric acid, then the Ti₃C₂T_x was intercalated and deliminated by ethanol treatment and ultrasonication process. The delaminated Ti₃C₂T_x MXene nanosheets (d-Ti₃C₂Tx) were characterized using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), X-ray diffraction spectroscopy (XRD), and Raman spectroscopy. It was found that Ti₃C₂T_x MXene was characterized by lamellar structure alternating with layers of Ti, Al and C. The EDX results revealed that the delaminated Ti₃C₂T_x MXene nanosheets were composed of Ti, C, Si, O, F, and a trace amount of Al. The XRD and Raman spectra further indicated the elimination of Al and the formation of two-dimensional Ti₃C₂T_x MXene nanosheets. The antifungal activity of the delaminated Ti₃C₂T_x MXene was determined against Trichoderma reesei using the modified agar disc method. Observation using inverted phase contrastmicroscopy revealed inhibited fungus growth with the absence of hyphae around the discs treated wtih MXene. The surrounding of the control groups without an inclusion of MXene was found with large number of hyphae and spores. In addition, the spores of the fungi treated with the samples containing d-Ti₃C₂T_x MXene nanosheets did not germinate even after 11 days of culture. The results demonstrated disruption to the hemispheric structural formation of fungi colony, inhibition of hyphae growth and cell damage for fungi grown on the d-Ti₃C₂T_x MXene nanosheets. These new findings suggest that d-Ti₃C₂T_x MXene nanosheets developed in this work could be a promising anti-fungi material.     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

Bond strength prediction for deformed steel rebar embedded in recycled coarse aggregate concrete

This paper summarizes the results of an experimental investigation into the bond behavior between recycled aggregate concrete (RAC) and deformed steel rebars, with the main variables being the recycled coarse aggregate replacement ratio (RCAr) and water-to-cement ratio of the concrete mixture. The investigation into splitting cracking strength indicates that the degradation of the bond splitting tensile stress of the cover concrete was affected by not only the roundness of the coarse aggregate particles but also the weak interfacial transition zone (ITZ) between the cement paste and the RCA that has a more porous structure in the ITZ than normal concrete. In this study, a linear relationship between the bond strength and the density of the RCA was found, but the high compressive strength reduced the effects of the parameters. To predict the bond strength of RAC using the main parameters, a multivariable model was developed using nonlinear regression analysis. It can be inferred from this study that the degradation characteristic of the bond strength of RAC can be predicted well, whereas other empirical equations and code provisions are very conservative.     

Effect of morphology on the photocatalytic activity of g-C3N4 photocatalysts under visible-light irradiation

Graphite-like carbon nitride (g-C₃N₄) photocatalysts with different morphologies have been synthesized using melamine as a precursor using a template-free wet chemical method. The as-prepared g-C₃N₄ nanorods, g-C₃N₄ microcones and porous g-C₃N₄ quadruple prisms were characterized by XRD, FESEM, FT-IR and UV–vis absorption spectrophotometer. These nanostructured g-C₃N₄ photocatalysts show better photocatalytic activity than bulk g-C₃N₄ under visible light irradiation in view of degrading Rhodamine B (RhB). The porous g-C₃N₄ quadruple prisms show the highest photocatalytic efficiency. We deduce that the surface area of the catalysts and their adsorption ability of target molecules play important roles in improving the photocatalytic activity of the g-C₃N₄ photocatalysts.     

Development and experimental validation of an overlay mortar with biocide activity

Biodeterioration of concrete by microorganism colonisation may be a problem in several structures, especially in irrigation and hydroelectric canals. The main problem in such structures is the proliferation of algae and cyanobacteria that affect the performance of the structure, increase the maintenance costs and affects its durability. A research was conducted to develop a novel cement-based material with biocide activity that can be used as an overlay mortar in existing structures, such as canals and pipes. With this aim, ten commercial biocides were evaluated in a laboratory campaign to assess the effectiveness of the compounds against the microbial colonisation of concrete. Both mono- and multicomponent formulations were designed from the commercial products, to increase their antimicrobial effect obtaining a set of biocide formulations. The formulations were submitted to a flowchart process to determine their influence on the physical properties of the concrete, evaluate the release of the actives, and their antimicrobial efficiency both before and after accelerated aging processes. During the campaign, some formulations were observed to diminish the strength of the concrete. Such behaviour was normally due to the interaction of the active with the cement hydration process. Other formulations showed a high release of active from the concrete in water, compromising the durability of the treatment. In general, monocomponent formulations did not succeed to fulfill all the requirements, thus multicomponent formulations were analysed. One studied multicomponent formulation presented particularly good results in all properties analysed. This product did not significantly change the properties of concrete and the release of active in water from the concrete was low, while the antimicrobial effects were long lasting.     

Enhance photocatalysis of TiO2 and ZnO ceramics by addition of fused silica as a UV guiding medium

We report a facile method to prepare porous TiO₂ and ZnO photo-catalytic ceramics in which colloidal silica was added to yield nano fused silica (FS). The colloidal silica forms continuous media within the porous ceramic structure, and when calcined at 550 °C, it converted to fused silica phase which is an excellent UV wave-guiding material. With light wave guiding effect of FS and capillary effect of reaction solution in the porous channels, the photo-catalytic reactions could occur at the vast active sites at interface inside the porous bulks, as well as at the external surfaces. Photo-catalysis experiments and kinetics were investigated and analyzed. The photo-catalytic efficiencies tested for methylene blue were enhanced by a factor of 4.1 for TiO₂/FS system and, astonishingly, by a factor of 34.6 for ZnO/FS system, when compared with pure TiO₂ and ZnO under identical testing conditions. A model of UV-waveguide ceramic systems was proposed and discussed. This study proposes a practical approach to construct UV-waveguide porous structures, of which the principle is also potentially applicable to other types of photo-catalytic materials, including visible light active photo-catalysts.